The 1080p Network IP Elevator Video System is a point-to-point/point-to-multipoint digital video link that allows you to surveil elevators up to 200 floors away. It is the most economical solution to deter vandalism and other criminal behavior. It is designed for streaming multiple HD resolution network IP cameras up to 200 floors. With IEEE 802.11a/n compliance and 300 Mb/s throughput, this video network bridge can be used to identify, monitor, and record elevator goings-on.
The VNO-58307ev comes with dual rubber duck antennas and dual video PoE capable 10/100 Mb/s (RJ-45) jacks for easy setup and trouble-free installation. It has signal strength LED indicators to allow for quick antenna alignment and the IP-67 rated construction can be used in all types of weather environments. The connection hardware is included and, the system does not require a traveling cable or a connection to the elevator mechanics. It complies with TSSA, ASME & FCC safety standards. The system is designed for short-to-medium range multi-camera mega-pixel applications and is compatible with ONVIF standards.
Brand: Videocomm Technologies
SKU: VNO-58307ev
In The Box
2x Wireless Video Access Points
2x PoE Injectors
2x Mounting Brackets
Product Manual
Special Feature: The VNO-58307ev is designed for short-to-medium range multi-camera mega-pixel applications enabling companies to surveil elevators up to 200 floors away.
Dimensions: 7.8" x 5.15"
Power: Power Supplies Included: 2 x 24VDC UL-Approved PoE Injectors
Transmission: Operating Frequency: 2.312GHz - 2.800GHz OFDM, MIMO
Service: No monthly fee
Operating Frequency: 5.185GHz - 5.825GHz
Modulation: OFDM, MIMO
Protocol: 802.11a/n
Security Format: AES 128 Bit Encrypted Data System + Hidden SSID
Data Rate: Up to 150Mbps
Hardware: Atheros AR9344 with 64Mb DDR Ram and 8Mb Flash
On-Board LED Indicators: Receive Signal Strength Indicator, Power, Lan 1 / 2, WLAN
Range & Elevation (Line of Sight): Up to 200 Floors
Camera Type: Network Camera NOT Included
Antenna Type: Embedded Directional 16dB + 3dB External Omni
Power Supplies Included: 2 x 24VDC UL-Approved PoE Injectors - Model # PS-2412PoE
Programming Software: Embedded - Dip-Switch Selectable
Tx & Rx Operating Voltage: 24VDC PoE Only
Current Consumption: 3 Watts @ 24VDC PoE
Construction: IP-67 Rated - UL-Approved All-Weather Design
Tx & Rx Mounting Brackets: Universal Stainless Steel Wall / Pole Mount
Operating Temperature Range: -40°F to +170°F (-40°C to 77°C)
Note: Compatible with all Network IP Products
FCC / IC Approved: Yes
